MODEL 2300

If you’re looking for a machine to grind your grain or forage in a permanent setting, then our line of stationary grinders is just what you will need. If you are wanting to grind strictly grain, the tub is replaced with a grain hopper to feed the grain directly into the machine’s mill. The unit comes with a 14″ discharge auger under the mill, which allows trouble free grinding with less mess under the machine. The machine has a support frame built onto the machine to make it ready to set into place. In addition, you get more than 40 years of hands-on, in-the-field experience in every Mighty Giant we build.

Category:
  • Tub opens hydraulically for servicing and changing screens.
  • Tub Operation is controlled by electronically-operated hydraulic governor.
  • Tub is hydraulically chain-driven with variable speed and reverse.
  • Trouble free High-capacity 14″ discharge auger.
  • Elevators drive from the top with rubber lagged pulley.
  • Hydraulically raise, lower, swing and fold the discharge elevator.
  • Hammers are reversible and have 4 hard-surfaced corners.
  • Capable of Grinding any type of Forage, Grain or Wood
  • Pin-hitch Chassis
  • Highest capacity, most durable PTO Grinder available
  • Remote Control Standard for Tub Start/Stop Elevator Raise/Lower/Swing
  • Suspension : 16,000 lb. capacity
  • Mill : 26″x48″ with 5″ shaft
  • Mill bearing size : 3 15/16″ Pillow Block
  • Hammers : Hay: 3/8″ or 1/2″, Wood: 1/2″
  • Number of Hammers & Hammer Swing : Up to 84 with 360° swing
  • Hammer (Mill) pins : 6 pins — each pin is 1-1/4″ in diameter
  • Mill disc thickness : Grain: 1/4″, Hay: 3/8″, Wood: 3/4″
  • Mill base : Tube Construction
  • Tub floor and walls : Grain/Hay: 1/4″ floor, 10 ga. walls, Wood: 3/8″ AR floor, 1/4″ walls
  • Tub Drive : Hydraulic motor drive with No. 2100,Heavy duty chain, self adjusting
  • Elevator dimensions : 24″ wide x 25′ long, folding and swinging
  • Elevator drive : Top drive via hydraulic motor
  • Discharge auger : 14″ diameter
  • Screen size : Numerous sizes – whole or half screens
  • Dimensions (Transport/Folded Up) : Length: 22’5″, Width: 11’4″, Height: 12′
  • Weight : Approximately 18,000 pounds grinder only,23,000 pounds with motors
  • Electrical : 400 hp, 1800 RPM, 3-Phase, 60 hertz, 460 Volts Motor 15 hp, Soft Start IN 3R Control Panel/Enclosure 15 hp 1800 254T TEFC Premium Efficient WE Motor for Auxiliary Hydraulics
  • Diesel : CAT C9.3B 415 hp Tier4F (DEF) w/214 Rear Clutch CAT C9.3B 415 hp Tier4F (DEF) w/KPTO19 Fluid Coupler